IEM Shout Out – 2017-10 One Day Course on Shell and Tube Exchanger Thermal Design

September 28, 2017

My technical division will be hosting a one day course on the 31st October, 2017. It is worth 6.5 CPD points, and held at Wisma IEM. The course will be presented by Ir. Anwar Ahmad.

During this Shell and Tube Heat Exchanger Thermal Design course, there will be overview on the thermal design for designing shell and tube heat exchanger by considering design, operational, and maintenance perspective. The design of the heat exchanger is extremely important, as it is the key element of a heat-exchanged system. This is not only on the desired temperature to achieve during operation but also when considering the optimum design prior procuring an exchanger. Furthermore, properly designed heat exchanger can reduce the turn-down time for maintenance as no frequent cleaning is required while operating the plant or platform. Technologies involved in this thermal technology will be discussed during the workshop to highlight the importance and advantages when designing and operating shell and tube heat exchanger (STHE).

Ir. Anwar Ahmad is a registered Professional Engineer with Board of Engineer (BEM), Corporate Member with Institute of Engineers, Malaysia (IEM), Corporate Member with Institute of Chemical Engineers, UK (IChemE), Chartered Engineer from Engineering Council, UK with more than eleven (11) years experiences in process engineering in oil and gas industry, mainly in design with engineering firm and operation for technical support during turn around.

Register here, or download the form here.


IEM Shout Out – 2017-01 Two-Day Course on Centrifugal Pump Theory And Application-Basic Principles

December 22, 2016

My technical division will be hosting a 2 day seminar on the 23rd and 24th January, 2017. It is worth TBA CPD points, and held at Wisma IEM. The course will be presented by Ir. Hassanazhari Ahdi. Process engineers, can you please attend?

CENTRIFUGAL PUMP THEORY AND APPLICATION shall provide the audience with the knowledge and principles of pump design, sizing, selection and performance analysis. The course will be beneficial to engineers dealing with pump and will be presented in a way that is comprehensible to the engineers who are with or without the oil and gas background. The objectives of the course are to provide exposure to the audiences on understanding of fundamental design of centrifugal pump, the critical pump parameters when evaluating pump selection and making the best decision on specification.

Ir. Hassanazhari Ahdi has been in the oil and gas industry for 27 years working for companies such as Technip, TPVN, KPOC and SDE. His core expertise is in design works, erection, testing, hook-up and commissioning.  Currently, he is an independent consultant providing consultancy for various design offices. He graduated from University of Malaya with a degree in Mechanical in year 1987 and a Masters in Engineering from UTM in year 2006. He has served many major Oil and Gas Companies locally and abroad such as PETRONAS, SHELL, EXXON-MOBIL, QATAR PETROLEUM, QATAR MEARSK OIL, TOTAL, CONOCO-PHILIPSs and CUU LONG.

Register here, or download the form here.


IEM Shout Out – 2017-01 Two-Day Course on Centrifugal Pump Theory And Application-Basic Principles

December 9, 2016

My technical division will be hosting a 2 day seminar on the 23rd and 24th January, 2017. It is worth TBA CPD points, and held at Wisma IEM. The course will be presented by Ir. Hassanazhari Ahdi. Process engineers, can you please attend?

CENTRIFUGAL PUMP THEORY AND APPLICATION shall provide the audience with the knowledge and principles of pump design, sizing, selection and performance analysis. The course will be beneficial to engineers dealing with pump and will be presented in a way that is comprehensible to the engineers who are with or without the oil and gas background. The objectives of the course are to provide exposure to the audiences on understanding of fundamental design of centrifugal pump, the critical pump parameters when evaluating pump selection and making the best decision on specification.

 

Ir. Hassanazhari Ahdi has been in the oil and gas industry for 27 years working for companies such as Technip, TPVN, KPOC and SDE. His core expertise is in design works, erection, testing, hook-up and commissioning.  Currently, he is an independent consultant providing consultancy for various design offices. He graduated from University of Malaya with a degree in Mechanical in year 1987 and a Masters in Engineering from UTM in year 2006. He has served many major Oil and Gas Companies locally and abroad such as PETRONAS, SHELL, EXXON-MOBIL, QATAR PETROLEUM, QATAR MEARSK OIL, TOTAL, CONOCO-PHILIPSs and CUU LONG.

Register here, or download the form here.


IEM Shout Out – Half Day Workshop on Shell and Tube Exchanger Thermal Design

January 11, 2016

My technical division will be hosting a 1/2 day seminar on the 16th January, 2015. It is worth 3.5 CPD points, and held at Wisma IEM. The course will be presented by Ir. Anwar Ahmad.

During this Shell and Tube Heat Exchanger Thermal Design course, there will be overview on the thermal design for designing shell and tube heat exchanger by considering design, operational, and maintenance perspective. The design of the heat exchanger is extremely important, as it is the key element of a heat-exchanged system. This is not only on the desired temperature to achieve during operation but also when considering the optimum design prior procuring an exchanger. Furthermore, properly designed heat exchanger can reduce the turn-down time for maintenance as no frequent cleaning is required while operating the plant or platform. Technologies involved in this thermal technology will be discussed during the workshop to highlight the importance and advantages when designing and operating shell and tube heat exchanger (STHE).

Ir. Anwar Ahmad is a registered Professional Engineer with Board of Engineer (BEM), Corporate Member with Institute of Engineers, Malaysia (IEM), Corporate Member with Institute of Chemical Engineers, UK (IChemE), Chartered Engineer from Engineering Council, UK with more than eleven (11) years experiences in process engineering in oil and gas industry, mainly in design with engineering firm and operation for technical support during turn around.

Register here, or download the form here.


IEM Shout Out – Half Day Workshop on Shell and Tube Exchanger Thermal Design

December 17, 2015

My technical division will be hosting a 1/2 day seminar on the 16th January, 2015. It is worth 3.5 CPD points, and held at Wisma IEM. The course will be presented by IIr. Anwar Ahmad.

During this Shell and Tube Heat Exchanger Thermal Design course, there will be overview on the thermal design for designing shell and tube heat exchanger by considering design, operational, and maintenance perspective. The design of the heat exchanger is extremely important, as it is the key element of a heat-exchanged system. This is not only on the desired temperature to achieve during operation but also when considering the optimum design prior procuring an exchanger. Furthermore, properly designed heat exchanger can reduce the turn-down time for maintenance as no frequent cleaning is required while operating the plant or platform. Technologies involved in this thermal technology will be discussed during the workshop to highlight the importance and advantages when designing and operating shell and tube heat exchanger (STHE).

Ir. Anwar Ahmad is a registered Professional Engineer with Board of Engineer (BEM), Corporate Member with Institute of Engineers, Malaysia (IEM), Corporate Member with Institute of Chemical Engineers, UK (IChemE), Chartered Engineer from Engineering Council, UK with more than eleven (11) years experiences in process engineering in oil and gas industry, mainly in design with engineering firm and operation for technical support during turn around.

Register here, or download the form here.


IEM Shout Out – Half Day Workshop on Shell and Tube Exchanger Thermal Design

December 10, 2015

My technical division will be hosting a 1/2 day seminar on the 16th January, 2015. It is worth 3.5 CPD points, and held at Wisma IEM. The course will be presented by IIr. Anwar Ahmad.

During this Shell and Tube Heat Exchanger Thermal Design course, there will be overview on the thermal design for designing shell and tube heat exchanger by considering design, operational, and maintenance perspective. The design of the heat exchanger is extremely important, as it is the key element of a heat-exchanged system. This is not only on the desired temperature to achieve during operation but also when considering the optimum design prior procuring an exchanger. Furthermore, properly designed heat exchanger can reduce the turn-down time for maintenance as no frequent cleaning is required while operating the plant or platform. Technologies involved in this thermal technology will be discussed during the workshop to highlight the importance and advantages when designing and operating shell and tube heat exchanger (STHE).

Ir. Anwar Ahmad is a registered Professional Engineer with Board of Engineer (BEM), Corporate Member with Institute of Engineers, Malaysia (IEM), Corporate Member with Institute of Chemical Engineers, UK (IChemE), Chartered Engineer from Engineering Council, UK with more than eleven (11) years experiences in process engineering in oil and gas industry, mainly in design with engineering firm and operation for technical support during turn around.

Register here, or download the form here.


IEM Shout Out – One-Day Workshop on “Essential Soft Skills for An Engineer to Fast Track the Career Ladder”

September 15, 2015

My technical division will be hosting a 1 day seminar on the 29th September , 2015. It is worth 6.5 CPD points, and held at Wisma IEM. The course will be presented by Ir. Low Chew Eow (Rocky). Those who want to figure out why there aren’t communicating as efficiently as they should, attend

The seminar will address some of the important soft skills needed to be acquired and sharpened such as:
–  Communication skills
–  Good attitudes to have and to focus on
–  Producing high quality e-mail
–  E-mail ethics
–  Reporting skills to various stakeholders
–  Planning skills
–  Task identifications and delegation skills

Ir. Low Chew Eow (Rocky) graduated from the University of Glasgow with a degree in Mechanical Engineering in 1990. He has more than 24 years of working experience in various roles. He is appointed as Industry Advisor of Universiti Tunku Abdul Rahman, Faculty of Engineering and Science.

He is currently the Head of Package Equipment Department in Technip Consultant (M) Sdn. Bhd. He is also the Member of Expert Network specializing in Pneumatic Conveying System within the Technip group. He has presented talks at the Institution of Engineers, Malaysia.

Register here, or download the form here.