Shout Out – One-Day Course on Safety Integrity Levels (SIL) 2016-11 Training For Workshop Participants

November 1, 2016

My technical division will be hosting a 1 day seminar on the 15th November, 2016. It is worth 6.5 CPD points, and held at Hilton Hotel. Since I’m giving it, I expect hoards will have to be turned away at the gates. And it’s a big room, so I need to fill the seats.

In the Layer of Protection methodology, a Safety Instrumented Function (SIF) designed to eliminate the cause of a risk or minimize the consequence of an event. The expectation of the SIF’s reliability to perform upon demand must be defined so that it is designed appropriately. The Safety Integrity Level (SIL) study is a tool used this.

This full day course is designed to educate participants in the SIL process from the perspective of a SIL team member. It is meant to provide both instruction and workshop sessions so that the participants:

  • Are familiar with the concept of ‘risk’
  • Are familiar with the theory and terminology behind Layers of Protection, SIS, SIF, SIL and LOPA
  • Are familiar with the different SIL methodologies: risk graph, risk matrix, LOPA.
  • Have expectations as to what the SIL workshop will (and won’t) provide.
  • Understand what deliverables can be expected from a SIL workshop.
  • Have the opportunity to participate in SIL exercise in a safe environment.Opportunity to share SIL experiences.

Wata has 19 years of experience in the oil and gas industry, in both design and operations.

Register here, or download the form here.


IEM Shout Out – 2016/10 One Day Course on Demolition Using Explosives

October 4, 2016

My technical division will be hosting a 1 day course on the 20th October, 2016, presented by Brig General Mustapha Omar, Ir. Look Keman Sahari and Ir. Dr. Mohamed Alias Yusof. It is worth 6.5 CPD points, and held at Wisma IEM. I expect that you register using your actual names, not your Pokemon handles.

Malaysia is considered a young country and rapidly developing. We see many new high rise building coming up even on small plot of land in city area. This is due to high cost of land. However, anything that goes up some day, sometimes it will have to come down. It can be due to aging, high cost of maintenance, availability of new technology, new planning by the owner or authority or whatever other reasons. It is very rare when forwarding development plan, the subject of the need for demolition later is ever considered. Bringing down a building or any structure by mechanical means for example will subject the neighbours to vibration, dust noise and numerous other dangers to them for a long time. It may even take several months. There are also incidents where demolition workers were injured and some were killed in line of duty. Demolition by using explosive may require the services of civil/structural engineer working together with the blasters and blasting engineer. The preparation may take months to study the structural plan of the building to be taken down, to survey the surrounding area and plan how to mitigate the effect of airblast, fragmentation, dust and ground vibration.

Hj Look Keman bin Sahari graduated in mining engineering from the University of Strathclyde, Scotland in 1979. He joined the Mines Department initially as Geotechnical engineer specialising in Slope engineering particularly technical investigation on slope failures. He later joined the Inspectorate division of the Department until retirement in 1996. In 1990 he continued his studies at Royal Military College of Science, Cranfield University, England and obtained MSc in Explosives Ordnance Engineering. His interest was then on the use of Shape Charge in the industry. On retirement he worked as Consultant Engineer in the use of explosive for mining, quarrying and construction. He had also served as expert witness in control blasting in Arbitration. As a committee member of IEM Training Board he had attended many courses particularly on Geotechnical Engineering, Health and Safety, forensic engineering and also tunnelling as Auditor. He is a Professional Engineer with Practicing Certificate and a Fellow of IEM. He had also given lecture on explosives application at IEM and Institute of Quarrying, Malaysia. He is also a qualified Shotfirer..

Brig General Mustapha bin Omar is a qualified Ammunition Technical Officer and had rose through the rank in the Malaysian Army  to become to Chief Ammunition Technical officer He is  an expert in the application of military explosives including demolition. He also had a Diploma in Industrial Management from UKM in 1993 and subsequently Bachelor in Business Administration from UPM in 2001. In 2002-2003 he further his studies at Royal Military College of Science, Cranfield University at MSc level in Explosives Ordnance Engineering. He is also knowledgeable in the use of commercial explosives and had attended a Shotfirer Course organised by Institute of Quarrying, Malaysia. He is currently a Senior Research Officer at STRIDE ( Institute Penyelidekan Sains Teknologi Pertahanan)

Associate Professor Ir. Dr. Mohamed Alias bin Yusof obtained his Bachelor Degree in Civil Engineering from UTM in 2002, MSc in Project Management from UITM in 2005 and PhD in Civil Engineering in 2012 from University Pertahanan National Malaysia. He is also a Professional Engineer registered with the Board of Engineer. Dr Alias specialises in the Blast Effect on Structure. He is also knowledgeable in Commercial and Military explosives and had also attended course in Explosives Engineering at Royal Military College of Science, Cranfield University He also attended Shotfirer Course and Blast Vibration, Monitoring and ControlCourse at Institute of Quarrying Malaysia.

Register here, or download the form here.


IEM Shout Out – 2016/10 One Day Course on Demolition Using Explosives

September 20, 2016

My technical division will be hosting a 1 day course on the 20th October, 2016, presented by Brig General Mustapha Omar, Ir. Look Keman Sahari and Ir. Dr. Mohamed Alias Yusof. It is worth 6.5 CPD points, and held at Wisma IEM. I expect that you register using your actual names, not your Pokemon handles.

Malaysia is considered a young country and rapidly developing. We see many new high rise building coming up even on small plot of land in city area. This is due to high cost of land. However, anything that goes up some day, sometimes it will have to come down. It can be due to aging, high cost of maintenance, availability of new technology, new planning by the owner or authority or whatever other reasons. It is very rare when forwarding development plan, the subject of the need for demolition later is ever considered. Bringing down a building or any structure by mechanical means for example will subject the neighbours to vibration, dust noise and numerous other dangers to them for a long time. It may even take several months. There are also incidents where demolition workers were injured and some were killed in line of duty. Demolition by using explosive may require the services of civil/structural engineer working together with the blasters and blasting engineer. The preparation may take months to study the structural plan of the building to be taken down, to survey the surrounding area and plan how to mitigate the effect of airblast, fragmentation, dust and ground vibration.

Hj Look Keman bin Sahari graduated in mining engineering from the University of Strathclyde, Scotland in 1979. He joined the Mines Department initially as Geotechnical engineer specialising in Slope engineering particularly technical investigation on slope failures. He later joined the Inspectorate division of the Department until retirement in 1996. In 1990 he continued his studies at Royal Military College of Science, Cranfield University, England and obtained MSc in Explosives Ordnance Engineering. His interest was then on the use of Shape Charge in the industry. On retirement he worked as Consultant Engineer in the use of explosive for mining, quarrying and construction. He had also served as expert witness in control blasting in Arbitration. As a committee member of IEM Training Board he had attended many courses particularly on Geotechnical Engineering, Health and Safety, forensic engineering and also tunnelling as Auditor. He is a Professional Engineer with Practicing Certificate and a Fellow of IEM. He had also given lecture on explosives application at IEM and Institute of Quarrying, Malaysia. He is also a qualified Shotfirer..

Brig General Mustapha bin Omar is a qualified Ammunition Technical Officer and had rose through the rank in the Malaysian Army  to become to Chief Ammunition Technical officer He is  an expert in the application of military explosives including demolition. He also had a Diploma in Industrial Management from UKM in 1993 and subsequently Bachelor in Business Administration from UPM in 2001. In 2002-2003 he further his studies at Royal Military College of Science, Cranfield University at MSc level in Explosives Ordnance Engineering. He is also knowledgeable in the use of commercial explosives and had attended a Shotfirer Course organised by Institute of Quarrying, Malaysia. He is currently a Senior Research Officer at STRIDE ( Institute Penyelidekan Sains Teknologi Pertahanan)

Associate Professor Ir. Dr. Mohamed Alias bin Yusof obtained his Bachelor Degree in Civil Engineering from UTM in 2002, MSc in Project Management from UITM in 2005 and PhD in Civil Engineering in 2012 from University Pertahanan National Malaysia. He is also a Professional Engineer registered with the Board of Engineer. Dr Alias specialises in the Blast Effect on Structure. He is also knowledgeable in Commercial and Military explosives and had also attended course in Explosives Engineering at Royal Military College of Science, Cranfield University He also attended Shotfirer Course and Blast Vibration, Monitoring and ControlCourse at Institute of Quarrying Malaysia.

Register here, or download the form here.


IEM Shout Out – 2016/04 Full-Day HAZOP Training For Team Members – A Practical Approach

March 25, 2016

My technical division will be hosting a 1 day course on the 28th April, 2016. It is worth 6.5 CPD points, and held at (wait for it) Hilton PJ. Since I’m giving it, I expect hoards will have to be turned away at the gates. And it’s a big room, so I need to fill the seats.

A Hazard and Operability study is a formal and systematic and detailed examination of the process and engineering intentions of new or existing facilities which assesses the hazard potential and effects on the facility as a whole when operation is outside of the design envelope, or individual items of equipment malfunction.

This course is designed to educate participants in the HAZOP process from the perspective of a HAZOP team member. It is meant to provide both instruction and workshop sessions so that the participants:

  • Are familiar with the concept of ‘risk’
  • Are familiar with the theory behind HAZOP
  • Are familiar with the actual HAZOP workshop process
  • Have expectations as to what the HAZOP will (and won’t provide)
  • Understand what deliverables can be expected from a HAZOP
  • Have the opportunity to participate in HAZOP exercise in a safe environment
  • Opportunity to share HAZOP experiences

At the end of the session, the participants should:

  • Understand the responsibilities of all parties in the HAZOP
  • Have experience in a HAZOP session.
  • Understand the outcomes from a HAZOP session

Wata has 19 years of experience in the oil and gas industry, in both design and operations.

Register here, or download the form here.


IEM Shout Out – 2016/04 Full-Day HAZOP Training For Team Members – A Practical Approach

March 10, 2016

My technical division will be hosting a 1 day course on the 31st MAY, 2016. It is worth 6.5 CPD points, and held at (wait for it) Hilton PJ. Since I’m giving it, I expect hoards will have to be turned away at the gates. And it’s a big room, so I need to fill the seats.

A Hazard and Operability study is a formal and systematic and detailed examination of the process and engineering intentions of new or existing facilities which assesses the hazard potential and effects on the facility as a whole when operation is outside of the design envelope, or individual items of equipment malfunction.

This course is designed to educate participants in the HAZOP process from the perspective of a HAZOP team member. It is meant to provide both instruction and workshop sessions so that the participants:

  • Are familiar with the concept of ‘risk’
  • Are familiar with the theory behind HAZOP
  • Are familiar with the actual HAZOP workshop process
  • Have expectations as to what the HAZOP will (and won’t provide)
  • Understand what deliverables can be expected from a HAZOP
  • Have the opportunity to participate in HAZOP exercise in a safe environment
  • Opportunity to share HAZOP experiences

At the end of the session, the participants should:

  • Understand the responsibilities of all parties in the HAZOP
  • Have experience in a HAZOP session.
  • Understand the outcomes from a HAZOP session

Wata has 19 years of experience in the oil and gas industry, in both design and operations.

Register here, or download the form here.


Shout Out – Two-Day Course on Safety Integrity Levels (SIL) Training For Workshop Participants

December 31, 2015

My technical division will be hosting a 2 day seminar on the 12th January, 2016. It is worth 13 CPD points, and held at Wisma IEM. Since I’m giving it, I expect hoards will have to be turned away at the gates. And it’s a big room, so I need to fill the seats.

In the Layer of Protection methodology, a Safety Instrumented Function (SIF) designed to eliminate the cause of a risk or minimize the consequence of an event. The expectation of the SIF’s reliability to perform upon demand must be defined so that it is designed appropriately. The Safety Integrity Level (SIL) study is a tool used this.

This full day course is designed to educate participants in the SIL process from the perspective of a SIL team member. It is meant to provide both instruction and workshop sessions so that the participants:

  • Are familiar with the concept of ‘risk’
  • Are familiar with the theory and terminology behind Layers of Protection, SIS, SIF, SIL and LOPA
  • Are familiar with the different SIL methodologies: risk graph, risk matrix, LOPA.
  • Have expectations as to what the SIL workshop will (and won’t) provide.
  • Understand what deliverables can be expected from a SIL workshop.
  • Have the opportunity to participate in SIL exercise in a safe environment.Opportunity to share SIL experiences.

Wata has 19 years of experience in the oil and gas industry, in both design and operations.

Register here, or download the form here.


(cancelled) IEM Shout Out (N Sembilan) – Full-Day HAZOP Training For Team Members – A Practical Approach

December 31, 2015

The course has moved inter-state.

Post note: and cancelled. What, my own state doesn’t want me?

The Negeri Sembilan branch will be hosting a 1 day seminar on the 20th January, 2016. It is worth 7 CPD points, and held at Wisma IEM. Since I’m giving it, I expect hoards will have to be turned away at the gates. And I get to baaliiiik kampuungg.

A Hazard and Operability study is a formal and systematic and detailed examination of the process and engineering intentions of new or existing facilities which assesses the hazard potential and effects on the facility as a whole when operation is outside of the design envelope, or individual items of equipment malfunction.

This course is designed to educate participants in the HAZOP process from the perspective of a HAZOP team member. It is meant to provide both instruction and workshop sessions so that the participants:

  • Are familiar with the concept of ‘risk’
  • Are familiar with the theory behind HAZOP
  • Are familiar with the actual HAZOP workshop process
  • Have expectations as to what the HAZOP will (and won’t provide)
  • Understand what deliverables can be expected from a HAZOP
  • Have the opportunity to participate in HAZOP exercise in a safe environment
  • Opportunity to share HAZOP experiences

At the end of the session, the participants should:

  • Understand the responsibilities of all parties in the HAZOP
  • Have experience in a HAZOP session.
  • Understand the outcomes from a HAZOP session

Wata has 20 years of experience in the oil and gas industry, in both design and operations.

Register here, or download the form here.