IEM Shout Out – Two-Day Workshop on Fluid Mechanics: Impacts on Line, Pump & Compressor Sizing

August 16, 2016

My technical division will be hosting a 2 day seminar on the 1st and 2nd September, 2016. It is worth 13 CPD points, and held at Wisma IEM. The course will be presented by Ir. Anwar Ahmad.

During this Fluid Mechanics: Impacts on Line, Pump, and Compressor Sizing course, there will be overview on the impacts of the fluid mechanics while executing line, pump, and compressor sizing by considering design, operational, and maintenance perspective. Appropriate sizing of all these are very important because of the operating cost where there might be damages to the piping, pump(s), and compressor(s) during operation if it is not properly designed. The impact mainly will give impacts due to the vibration which lead to cavitation and vice versa. Furthermore, properly sized of line sizes, pump(s), and compressor(s) can reduce the turn-down time for maintenance as no issues pertaining to vibration and cavitation which may avoid from frequent changing of the parts for both pump(s) and compressor(s). Codes and Standards applicable for the sizing of line, pump, and compressor will be discussed which may affect upstream and/or upstream equipment of the system(s).

Learning Outcomes

  • Fundamental of Fluid Mechanics
  • Line, Pump, and Compressor Sizing and Correlation among Line, Pump, and Compressor with respect to Fluid Mechanics
  • How does Fluid Mechanics will affect to the operating cost of the plant?
  • How does flow characteristics will affect to the line, pump, and compressor sizing?
  • How to perform hydraulic calculation for new plant and How to evaluate hydraulic calculation for existing facilities especially for revamp study and the impacts of Fluid Mechanics from operational perspective;
  • considerations to be considered during design stage
  • Lesson learnt from previous projects on line, pump, and compressor sizing from both design and operational perspectives.

Ir. Anwar Ahmad is a registered Professional Engineer with Board of Engineer (BEM), Corporate Member with Institute of Engineers, Malaysia (IEM), Corporate Member with Institute of Chemical Engineers, UK (IChemE), Chartered Engineer from Engineering Council, UK with more than eleven (11) years experiences in process engineering in oil and gas industry, mainly in design with engineering firm and operation for technical support during turn around Experienced in process simulations (Hysys, PetroSim, and VMGSim/iCON), heat exchanger rating software (HTRI), flare network backpressure software (FlareNet/Aspen Flare System Analyzer), and flare radiation study software (FlareSim). He’s currently freelance process engineer attached to engineering firms based requirement basis when executing projects and also execute projects remotely if required.

Register here, or download the form here.


IEM Shout Out – Technical Visit to PETRONAS Penapisan Sdn Bhd (rescheduled)

July 28, 2016

This is a shout out for the IEM. My technical division will be hosting a trip to PETRONAS Penapisan (Terengganu) Sdn Bhd. It will be on the 28th August, 2016. You will be anointed with 3 CPD / PDP hours. If you with to visit the site, come and register.

PETRONAS Penapisan (Terengganu) Sdn Bhd – PP(T)SB was incorporated in 1982 to meet a need to process and add value to the indigenous crude from offshore Terengganu, as well as to secure reliable, efficient, safe and cost effective supply of refined petroleum products to the PETRONAS Group of Companies. PP(T)SB has proven its capability in providing efficient, safe, reliable uninterrupted supply of petroleum products such as gasoline, LPG, diesel, jet fuel, naphtha and Low Sulphur Waxy Residue (LSWR) to its domestic customers and also exported to several overseas destinations.

Register here and get the flyer here.


IEM Shout Out – Technical Visit To Technical Visit to PETRONAS Penapisan (Terengganu) Sdn Bhd

July 21, 2016

This is a shout out for the IEM. My Technical Division will be having a visit on Sunday 21st August, 2016.  Trip starts at 7.00am.

PETRONAS Penapisan (Terengganu) Sdn Bhd – PP(T)SB was incorporated in 1982 to meet a need to process and add value to the indigenous crude from offshore Terengganu, as well as to secure reliable, efficient, safe and cost effective supply of refined petroleum products to the PETRONAS Group of Companies. PP(T)SB has proven its capability in providing efficient, safe, reliable uninterrupted supply of petroleum products such as gasoline, LPG, diesel, jet fuel, naphtha and Low Sulphur Waxy  Residue (LSWR) to its domestic customers and also exported to several overseas destinations. PP(T)SB has been entrusted to manage and operate the Aromatics plant complex, which is owned by 70% PETRONAS Chemical Aromatics Sdn Bhd (PC AROMATICS) and 30%  Mitsubishi Corporation & JX Nippon Oil & Energy Corporation – (MJPX Co. Limited), that produces paraxylene and benzene. Quality and HSE ranks high in PP(T)SB’s business operations as it strives to ensure that existing petroleum products specifications are met and employees are regularly trained on strict HSE measures to inculcate and maintain high level of awareness on the impact of the refinery’s operations to natural surroundings. Towards this end, PP(T)SB received the MS ISO 9002, ISO 14001, ISO/IEC 10725 and received several national level HSE awards such as MSOSH Gold Award, Notable Achievement and Terengganu State Award in Prime Minister’s Hibiscus Award 2012/2013.

You can register here and download the flyer here.


IEM Shout Out – Technical Visit to PETRONAS Penapisan Sdn Bhd

July 14, 2016

This is a shout out for the IEM. My technical division will be hosting a trip to PETRONAS Penapisan (Terengganu) Sdn Bhd. It will be on the 25th August, 2016. You will be anointed with 3 CPD / PDP hours. If you with to visit the site, come and register.

PETRONAS Penapisan (Terengganu) Sdn Bhd – PP(T)SB was incorporated in 1982 to meet a need to process and add value to the indigenous crude from offshore Terengganu, as well as to secure reliable, efficient, safe and cost effective supply of refined petroleum products to the PETRONAS Group of Companies. PP(T)SB has proven its capability in providing efficient, safe, reliable uninterrupted supply of petroleum products such as gasoline, LPG, diesel, jet fuel, naphtha and Low Sulphur Waxy Residue (LSWR) to its domestic customers and also exported to several overseas destinations.

 

Register here and get the flyer here.


Marketing Rounds – Tarawikh Places

July 13, 2016

During Ramadhan, I had the opportunity to go to Surabaya for work, and explore some new tarawikh stops.

IMG_20160620_184151


Anniversary – Seveso Disaster

July 10, 2016

Process Safety Engineers never forget.


Anniversary – Flixborough

June 1, 2016

Process Safety engineers never forget.


O&G firm, varsity ink research and talent development pact

May 15, 2016

Dateline 2016-03-30, The Star:

Shell MDS Sdn Bhd (SMDS) and Universiti Malaysia Sarawak (Unimas) have once again strengthened their ties through the signing of a Memorandum of Understanding (MoU) for research and talent development.

Unimas vice-chancellor Prof Datuk Dr Mohd Kadim Suaidi said Unimas placed important focus in the oil and gas industry because it produced graduates from that industry.

“We produce research product or activities from oil and gas industry, therefore we need an industry partner to look at all these things together with us. We have established an industry and community engagement office which focuses on industry engagement. The collaboration with SMDS is something that I look forward to,” he said during the MoU signing ceremony at Wisma Bapa Malaysia.

 

 


IChemE – SONG

April 6, 2016

At one of the IChemE Oil & Natural Gas Special Interest Group (SONG) events, I caught up with Jeff Jones.

 


IEM Shout Out – Technical Visit to Yakult (M) Sdn Bhd

March 15, 2016

This is a shout out for the IEM. My technical division will be hosting a trip to Yakult. It will be a ‘technical’ visit (hint, hint) on the 19th March, 2016. You will be anointed with 3 CPD / PDP hours.

Yakult was born over 75 years ago and since then has been loved by 28 million of consumers overseas. However, in Malaysia, Yakult is still a young and growing company. Yakult Ace was launched here just a few years ago in 2004. Yakult (Malaysia) Sdn Bhd is a wholly owned subsidiary of Yakult Honsha, Japan. Yakult has committed millions of ringgit to establish and operate our one and only local factory in Seremban, Negeri Sembilan and our Head Office in Glenmarie, Shah Alam. Since then, we have opened branch offices in Johor Bahru, Melaka, Penang, Kuantan, Ipoh, Seremban and Kota Bharu. Yakult is a high quality probiotics in the form of a cultured milk drink. Yakult contains the probiotic bacteria “Lactobacillus casei Shirota” (also called the “Shirota strain”). With 30 billion live Shirota strain in each bottle, Yakult has among the highest concentrations of probiotics compared to other probiotics on the market (most probiotic drinks and supplements claim to contain at most 1 to 10 billion live probiotic bacteria per serving or per capsule). The Yakult factory was built specially with visitors in mind where the participants can view the whole production process and see how Yakult is being made and can even take a closer look at our bacteria using a microscope, enjoy fun and educational video shows, and sample some delicious, freshly-made Yakult.

 

Register here and get the flyer here.