IEM Shout Out – One Day Course on Corrosion Control of Steel Structures (postponed)

November 19, 2013

This is a shout out for IEM. The Chemical Engineering Technical Division will be organizing a one day course on Corrosion Control of Steel Structures on the 9th December, 2013 (Monday) at Wisma IEM, PJ. The session is scheduled to start at 9 a.m. (registration at 8.30 a.m.) and end around 5 p.m. Participant will be granted 3.5 CPD/ PDP hours at the end of the course.

Corrosion has been a concern in many industries. Corrosion can cause unexpected failures of structures and can result in huge losses in life, production as well as environmental. It has been reported that corrosion can, on average, causing around 3% of GNP in many industrialized countries.

Cathodic protection (CP) is one of few most widely applied corrosion protection methods. It has been successfully used to overcome corrosion and extension of service life of structures. The course is aimed to provide the understanding of principle of CP, techniques of CP survey and measurements and interpretation of CP survey data.

The course will introduce you to the following topics:

  • Principle of Cathodic Protection
  • Type of Cathodic Protection
  • Criteria of Cathodic Protection
  • Electrical Measurement for Cathodic Protection System
  • Special Cathodic Protection Survey Techniques

Mr. Kang Kim Ang, MSc. Corrosion (UMIST. U.K.), Dip. Materials Engineering (TARC), C.Eng., FIMM, Micorr, a Chartered Engineer registered with Engineering Council, UK and the Corrosion Specialist and Cathodic Protection Specialist accredited by National Association of Corrosion Engineer (NACE), USA and Institute of Materials, Malaysia (IMM).

Mr. Kang has over 25 years of experience in corrosion control, Cathodic Protection, heavy‐duty coatings, passive fire protection, and corrosion inspection in the oil & gas, marine, petrochemical, construction and industrial sectors in Malaysia, Indonesia, Philipines, Vietnam, Myanmar and some Middle East countries. He is currently the managing director of CORRTROL Group of companies, the local leading companies which specialized in EPCC, consultancy, R&D and various services in the field of corrosion protection for oil and gas projects.

Engr. Ong Wei Rex, M.Eng. Mechanical (UTM), B.Eng. Mechanical (Material) Engineering (UTM), Cathodic Protection Specialist by National Association of Corrosion Engineer (NACE), USA and CP Technologist Level 2 accredited by Institute of Materials, Malaysia (IMM). Eng Ong is a Graduate Member of IEM. He is also an active committee member of the Chemical Engineering Technical Division.

Register here or download the form here. A map to Wisma IEM is presented here.

Leave a Comment » | Chemical, engineering, Malaysia | Tagged: , | Permalink
Posted by Wata

IEM Shout Out – Talk On Introduction to Measurement

November 6, 2013

This is a shout out for the IEM. My Technical Division will be having a talk on Wed, 6th October, 2012. It’ll be at 5:30 pm at Wisma IEM. Note that no CPD points will be awarded, but I think the talk is important enough for you to attend.

Measurement is an important part of the oil and gas industry. The industry focus has mainly been on improving safety and optimizing production, but without accurate and credible measurement, there will be an unacceptable level of uncertainty in the amount being produced. This uncertainty may translate to commercial disputes, or improper management of available reserves.

This presentation will provide an introduction to measurement. The session will be broken down as follows:

Part 1: Introduction to Measurement (approximately one hour)
Part 2: Why Measurement is Important (approximately one hour)

The presentations are part of TUV NEL’s ‘Free Flow Measurement Training’ series.

Gilbert has worked in the Engineering Industry since 1966 progressively developing a career path, which included a Managing Directorship in a specialised Flow Measurement Consultancy Company. The majority of his career has been concentrated in the area of flow measurement, allocation, sampling and analysis in the Oil and Gas Industry. His current role is developing a Flow Consultancy business for TÜV NEL in the Asia Pacific Region.

Chris is a flow measurement consultant at NEL in Glasgow, Scotland who specialises in the oil & gas industry. He has approximately 5 years experience at NEL and works predominately on consultancy for the oil & gas industry. Chris has in depth knowledge of flow measurement technologies, allocation and measurement uncertainty. Chris has been the technical lead on several high value projects during his time at NEL. Chris’s knowledge and expertise were exploited in the NEL led Joint industry Project researching measurement techniques for high viscosity fluids. He was also responsible for the modification to the NEL oil flow facility to incorporate high viscosity fluids up to 1500 cSt. He has presented technical papers on flow measurement at several conferences around the world, including Calgary, Kuala Lumpur, London and Oslo. He has also represented NEL at the Energy Institute HMC-1 meetings and been part of the Oil & Gas Focus Group steering committee.

You can register here, and flyers for the above and other events may be obtained here.

Leave a Comment » | Chemical, engineering, Malaysia, oil and gas | Tagged: , , | Permalink
Posted by Wata

IEM Shout Out – Talk On Introduction to Measurement

October 30, 2013

This is a shout out for the IEM. My Technical Division will be having a talk on Wed, 6th October, 2012. It’ll be at 5:30 pm at Wisma IEM. Note that no CPD points will be awarded, but I think the talk is important enough for you to attend.

Measurement is an important part of the oil and gas industry. The industry focus has mainly been on improving safety and optimizing production, but without accurate and credible measurement, there will be an unacceptable level of uncertainty in the amount being produced. This uncertainty may translate to commercial disputes, or improper management of available reserves.

This presentation will provide an introduction to measurement. The session will be broken down as follows:

Part 1: Introduction to Measurement (approximately one hour)
Part 2: Why Measurement is Important (approximately one hour)

The presentations are part of TUV NEL’s ‘Free Flow Measurement Training’ series.

Gilbert has worked in the Engineering Industry since 1966 progressively developing a career path, which included a Managing Directorship in a specialised Flow Measurement Consultancy Company. The majority of his career has been concentrated in the area of flow measurement, allocation, sampling and analysis in the Oil and Gas Industry. His current role is developing a Flow Consultancy business for TÜV NEL in the Asia Pacific Region.

Chris is a flow measurement consultant at NEL in Glasgow, Scotland who specialises in the oil & gas industry. He has approximately 5 years experience at NEL and works predominately on consultancy for the oil & gas industry. Chris has in depth knowledge of flow measurement technologies, allocation and measurement uncertainty. Chris has been the technical lead on several high value projects during his time at NEL. Chris’s knowledge and expertise were exploited in the NEL led Joint industry Project researching measurement techniques for high viscosity fluids. He was also responsible for the modification to the NEL oil flow facility to incorporate high viscosity fluids up to 1500 cSt. He has presented technical papers on flow measurement at several conferences around the world, including Calgary, Kuala Lumpur, London and Oslo. He has also represented NEL at the Energy Institute HMC-1 meetings and been part of the Oil & Gas Focus Group steering committee.

You can register here, and flyers for the above and other events may be obtained here.

Leave a Comment » | Chemical, engineering, Malaysia | Tagged: , , | Permalink
Posted by Wata

IEM Shout Out – Talk On Introduction to Measurement

October 26, 2013

This is a shout out for the IEM. My Technical Division will be having a talk on Wed, 6th October, 2012. It’ll be at 5:30 pm at Wisma IEM. Note that no CPD points will be awarded, but I think the talk is important enough for you to attend.

Measurement is an important part of the oil and gas industry. The industry focus has mainly been on improving safety and optimizing production, but without accurate and credible measurement, there will be an unacceptable level of uncertainty in the amount being produced. This uncertainty may translate to commercial disputes, or improper management of available reserves.

This presentation will provide an introduction to measurement. The session will be broken down as follows:

Part 1: Introduction to Measurement (approximately one hour)
Part 2: Why Measurement is Important (approximately one hour)

The presentations are part of TUV NEL’s ‘Free Flow Measurement Training’ series.

Gilbert has worked in the Engineering Industry since 1966 progressively developing a career path, which included a Managing Directorship in a specialised Flow Measurement Consultancy Company. The majority of his career has been concentrated in the area of flow measurement, allocation, sampling and analysis in the Oil and Gas Industry. His current role is developing a Flow Consultancy business for TÜV NEL in the Asia Pacific Region.

Chris is a flow measurement consultant at NEL in Glasgow, Scotland who specialises in the oil & gas industry. He has approximately 5 years experience at NEL and works predominately on consultancy for the oil & gas industry. Chris has in depth knowledge of flow measurement technologies, allocation and measurement uncertainty. Chris has been the technical lead on several high value projects during his time at NEL. Chris’s knowledge and expertise were exploited in the NEL led Joint industry Project researching measurement techniques for high viscosity fluids. He was also responsible for the modification to the NEL oil flow facility to incorporate high viscosity fluids up to 1500 cSt. He has presented technical papers on flow measurement at several conferences around the world, including Calgary, Kuala Lumpur, London and Oslo. He has also represented NEL at the Energy Institute HMC-1 meetings and been part of the Oil & Gas Focus Group steering committee.

You can register here, and flyers for the above and other events may be obtained here.

Leave a Comment » | Chemical, engineering, Malaysia, oil and gas | Tagged: , , | Permalink
Posted by Wata

IEM Shout Out – Talk on The Engineering of Oil Production

October 16, 2013

This is a shout out for the IEM. I’m giving a talk (shameless self promotion) with my Technical Division on 19th October, 2013. It’ll be at 8:30 am (makan-makan at 8:00) at Wisma IEM.

This presentation will provide a quick introduction into the engineering of oil production. It will start with an introduction to important oil properties to consider when producing an oilfield, and how this data is used. It then moves to a generic offshore production facility, pointing out the salient points, design considerations and major equipment used in oil production. It closes out with a quick look at downstream facilities.

Registration for the above talk may be done here, and the flyers may be picked up here.

Leave a Comment » | Chemical, engineering, Malaysia | Tagged: , | Permalink
Posted by Wata

IEM Shout Out – Talk on The Engineering of Oil Production

October 9, 2013

This is a shout out for the IEM. I’m giving a talk (shameless self promotion) with my Technical Division on 19th October, 2013. It’ll be at 8:30 am (makan-makan at 8:00) at Wisma IEM.

This presentation will provide a quick introduction into the engineering of oil production. It will start with an introduction to important oil properties to consider when producing an oilfield, and how this data is used. It then moves to a generic offshore production facility, pointing out the salient points, design considerations and major equipment used in oil production. It closes out with a quick look at downstream facilities.

Registration for the above talk may be done here, and the flyers may be picked up here.

Leave a Comment » | Chemical, engineering, Malaysia | Tagged: , | Permalink
Posted by Wata

Anniversary – Seveso Disaster

July 10, 2013

Process Safety Engineers never forget.

Leave a Comment » | Chemical | Permalink
Posted by Wata

IEM Shout Out – Technical Visit To Gas Malaysia Berhad

June 18, 2013

This is a shout out for the IEM. My Technical Division will be visiting Gas Malaysia Berhad, No.5 Jalan Serendah 26/17, Shah Alam, Selangor on Tuesday 25th June, 2013.

Gas Malaysia is a natural gas distribution company in Malaysia. The company headquarters is located in Shah Alam. It has three regional offices, located in Prai, Gebeng and Pasir Gudang, and seven branch offices located throughout Peninsular Malaysia.

The company was incorporated on 16 May 1992 to construct and operate the natural gas distribution system within Peninsular Malaysia. In December 2000, Gas Malaysia expanded its business to include the reticulated liquefied petroleum gas.
As of July 2005, the company had 452 industrial customers, more than 600 commercial customers and over 3,000 residential customers.As of February 2011, Gas Malaysia had 33,707 residential and commercial customers as well as 691 industrial customers. In 2010, total gas sold by Gas Malaysia was 117.8 million British thermal unit throughout Peninsular Malaysia. As of February 2011, its network of gas pipelines covered a total of 1,726.6 kilometers (1,072.9 mi)

Register for this event here. Download the brochure here.

Leave a Comment » | Chemical, engineering, Malaysia, oil and gas | Tagged: , , , , | Permalink
Posted by Wata

IEM Shout Out – Technical Visit To Selinsing Gold Mine Manager Sdn Bhd

June 17, 2013

This is a shout out for the IEM. My Technical Division will be visiting Selinsing Gold Mines Manager Sdn Bhd, 157 Jalan Bukit Bius, 27200 Kuala Lipis, Pahang on Saturday 22nd June, 2013.

The Selinsing Gold Mine project is located at Bukit Selinsing near Sungai Koyan, approximately 65km north of Raub and 30km west of Kuala Lipis. A trip to Selinsing from Kuala Lumpur may take between 2 to 3 hours depending on traffic and weather condition.

Selinsing has a long mining history. Mining commenced prior to 1888 and has operated intermittently through to 1966. Underground and open cut mining, together with tailings treatment has produced an estimated 85,000 ounces of gold during this period. Fast forward to present day between 2003 and 2005, treatment of the tailings using heap leach extraction produced 6,624 ounces. In October 2008, a new gold treatment plant was built resulting in the first gold poured from the gravity circuit 12 months later. July 2009 saw open pit mining started at the location and began hauling ore material to the ROM pad for production and by February 2010 the projects’ own carbon-in-leach (CIL) circuit commenced commissioning.

The Selinsing deposit occurs along the north striking Raub, Bentong Suture, and a major tectonic feature that runs through peninsular Malaysia. The deposit is hosted by a series of auriferous quartz veins and stockworks of quartz veinlets in a package of sheared calcareous epiclastic sediments. Gold mineralization at Selinsing is associated with high grade quartz veining and associated sericitization and silification within a major shear zone.

The Selinsing gold mine project contains a resource comprised of an indicated mineral resource of 4.82 million tonnes at 1.49 gpt Au, using a cut-off of 0.59 gpt Au for contained ounces of 231,000 ounces of gold, and an inferred mineral resource of 10.32 million tonnes at a grade of 1.17 gpt Au for contained ounces of 388,000 ounces f gold at similar cut-off grade. The resource is a near surface, open pitable deposit containing gold bearing material amenable to CIL treatment, with comprehensive metallurgical test work showing 92% to 95% recovery by CIL.

Register for this event here. Download the brochure here.

Leave a Comment » | Chemical, engineering, Malaysia, oil and gas | Tagged: , , , | Permalink
Posted by Wata

IEM Shout Out – Technical Visit To Selinsing Gold Mine Manager Sdn Bhd

June 15, 2013

This is a shout out for the IEM. My Technical Division will be visiting Selinsing Gold Mines Manager Sdn Bhd, 157 Jalan Bukit Bius, 27200 Kuala Lipis, Pahang on Saturday 22nd June, 2013.

The Selinsing Gold Mine project is located at Bukit Selinsing near Sungai Koyan, approximately 65km north of Raub and 30km west of Kuala Lipis. A trip to Selinsing from Kuala Lumpur may take between 2 to 3 hours depending on traffic and weather condition.

Selinsing has a long mining history. Mining commenced prior to 1888 and has operated intermittently through to 1966. Underground and open cut mining, together with tailings treatment has produced an estimated 85,000 ounces of gold during this period. Fast forward to present day between 2003 and 2005, treatment of the tailings using heap leach extraction produced 6,624 ounces. In October 2008, a new gold treatment plant was built resulting in the first gold poured from the gravity circuit 12 months later. July 2009 saw open pit mining started at the location and began hauling ore material to the ROM pad for production and by February 2010 the projects’ own carbon-in-leach (CIL) circuit commenced commissioning.

The Selinsing deposit occurs along the north striking Raub, Bentong Suture, and a major tectonic feature that runs through peninsular Malaysia. The deposit is hosted by a series of auriferous quartz veins and stockworks of quartz veinlets in a package of sheared calcareous epiclastic sediments. Gold mineralization at Selinsing is associated with high grade quartz veining and associated sericitization and silification within a major shear zone.

The Selinsing gold mine project contains a resource comprised of an indicated mineral resource of 4.82 million tonnes at 1.49 gpt Au, using a cut-off of 0.59 gpt Au for contained ounces of 231,000 ounces of gold, and an inferred mineral resource of 10.32 million tonnes at a grade of 1.17 gpt Au for contained ounces of 388,000 ounces f gold at similar cut-off grade. The resource is a near surface, open pitable deposit containing gold bearing material amenable to CIL treatment, with comprehensive metallurgical test work showing 92% to 95% recovery by CIL.

Register for this event here. Download the brochure here.

Leave a Comment » | Chemical, engineering, Malaysia, oil and gas | Tagged: , , , | Permalink
Posted by Wata

« Previous Entries
Next Entries »